Subtotal = $0.00 
Items = 0 
View Cart
United States
1-800-358-5525 or 
Welcome,
log in or register
Check order status
You are filtering by:
Category:
Clear Category Calibration Services
Clear Category Flowmeter Calibrations
Clear all filters
Price Range:
$200 to $250 (3)
$250 to $299 (1)
Custom Ordering Solutions
Custom Ordering Solutions
Let us find the exact product you need. We have access to suppliers full lines - for products beyond what you see here. Call 1-800-358-5525
 
Home  >  Calibration Services > Flowmeter Calibrations

Flowmeter Calibrations

Flowmeter Calibrations

  • All calibration certificates contain as-found and as-left data , estimated measurement uncertainties (emu’s) and test uncertainty ratios (TUR’s) at no additional cost!

  • NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer’s published specification
  • FDA, EPA, USDA, ISO and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
  • Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025 and MIL-STD-45662A. See the sample certificate under the “More Info” section to see how InnoCal’s certificates provide more information in a concise manner than the rest of the industry.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory which is technically proficient and committed to quality and customer-focused continuous improvement. Our scope of A2LA accreditation can be found under the “More Info” section.
From variable-area to gas-mass flowmeters, our highly trained technicians use the latest technology to perform gas-flow measurements. Our computerized, automated standards allow us to perform NIST-traceable accredited mass and correlated flow measurements, using air or nitrogen gas. When correlation to other gases is needed, our metrologists will provide you with correlated data or gas correlation table.

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated. Measurements reported on our reports are traceable to SI units via national standards maintained by NIST and are performed in compliance with MIL-STD-45662A, ANSI/NCSL Z540-1-1994, 10CFR50, Appendix B, ISO9002-94, and ISO/IEC 17025:2005
 Product Detail
Sort
 Availability
 Price
Representative photo only NIST Traceable Calibration Air Gas Flowmeter

NIST-Traceable Calibration; Air/Gas Flowmeter

Product Type Flow Switch
Mfg Part#
DO-17080-00
Usually ships in 10 days.
$235.00 USD/EACH

Qty:
Representative photo only NIST traceable Calibration Mass Flowmeter

NIST-traceable Calibration; Mass Flowmeter

Product Type Flow Switch
Mfg Part#
DO-17080-10
Usually ships in 10 days.
$235.00 USD/EACH

Qty:
Representative photo only NIST Traceable Calibration Liquid Flowmeter 1 ccm to 300 LPM water

NIST-Traceable Calibration; Liquid Flowmeter, 1 ccm to 300 LPM water

Product Type Flow Switch
Mfg Part#
DO-17080-12
Usually ships in 14 days.
$250.00 USD/EACH

Qty:
3 results (showing 1 - 3 )
Per Page 
Home  >  Calibration Services > Flowmeter Calibrations