Item Total = $0.00 
Items = 0 
View Cart
United States
1-800-358-5525 or 
Welcome,
log in or register
 

Davis Instruments 6410 Anemometer for Vantage Pro2 and Vantage Pro

Davis Instruments  |   Mfr# 6410  |   Item# DO-34542-64

$155.00 USD/EACH

Do you qualify for a better price? Log in now!

Are you a reseller or buying in bulk? Call us today.


    Replacement anemometer with mounting base for use with both wireless and cabled Vantage Pro2 and Vantage Pro weather stations.

    Rugged contruction stands up to hurricane-force winds, yet is sensitive to light breezes. Sealed stainless steel bearings provides long life under harsh conditions.

    Includes both wind speed and wind direction sensors, mounting hardware, and 40 ft. (12 m) cable.
    Available for sale in the United States and Canada only.
    Product Type Vane Anemometer
    Brand Davis Instruments
    Qty/ea 1
    Manufacturer number 6410





    Technical Resources
     
    Service & Support
    Still have questions
    Contact Our Experts
    for FREE product
    application selection
    and support.
    or call 1-800-358-5525
    Custom Ordering Solutions
    Custom Ordering Solutions
    Let us find the exact product you need. We have access to suppliers full lines - for products beyond what you see here. Call 1-800-358-5525
    Questions and Answers

    Do you have questions about this product?

    Get answers from real customers and in-house experts with AnswerBox.

    4 Questions | 4 Answers
    Displaying questions 1-4
    • Q:

      I recently purchased the Vantage Vue 6250. The only issue I'm having is rainfall accuracy during high winds from a northerly direction. I believe the anemometer cups may be deflecting rain away from the funnel?? Would it be possible to remove the currently installed cups and install a 6410 Anemometer away from the unit? I have the ISS placed 5' above the roof line (unobstructed) with the solar panel pointing due south.
      Asked on 4/22/2016 by Randy from Mansfield, Texas

      1 answer

      • STAFF EXPERT

        A:

        You may not need to replace anything. One action you can take to verify if there is an issue or not is put another 4 in graduated rain cup next to it, for about 3 rain storms and average them out. This is because during high winds, rain can sometimes blow sideways and the cup won't get full readings. It is typically a normal phenomenon that can be corrected for due to normalizing the rainfall.

        Answered on 4/26/2016 by Rishi from Technical Support
    • Q:

      Do you have mounting drawings that I can down load for the FF-34542-64 anemometer>
      Asked on 2/5/2013 by Gail from Santa Clara, CA

      1 answer

      • STAFF EXPERT

        A:

        We have no drawings but it can hardly be easier. The base is bolted to a pole measuring from 1" up to 1 5/8" diameter using the supplied u-bolt. Per the instructions, point the arm of the anemometer due north, then fasten it down.

        Alternatively, you may bolt the base flat face to a post or wall, using the lag bolts supplied. Again, point the arm due north. The included instructions should make this all clear to you.

        Answered on 2/5/2013 by Jon from Technical Support
    • Q:

      I have the Vantage pro 2. What does it mean when the console says "rain rate alarm * "

      Thank you
      Asked on 9/17/2012 by Lenny from Helena, MT.

      1 answer

      • STAFF EXPERT

        A:

        It means that either you are having a cloud burst or there is an error in reporting the rate at which rain is falling.

        Answered on 9/17/2012 by Jon from Technical Support
    • Q:

      Is the 34542-64 the correct replacement part for a Vantage Pro 2 weather station? And,
      does it come with the long wire to connect it to the station? Anomometer on top point of house, station on deck.

      Thanks.
      Asked on 12/6/2010 by Gail from Bethany Beach, DE

      1 answer

      • STAFF EXPERT

        A:

        Sku# 34542-64 is the actual replacement anemometer for a Pro2, including the 40' cable to the rest of the ISS.

        Answered on 12/10/2010 by Jon from Technical Support
    Displaying questions 1-4

    Do you have a question about this product? 

    Product Reviews