Item Total = $0.00 
Items = 0 
View Cart
United States
1-800-358-5525 or 
Welcome,
log in or register
 

Mark-10 WT3-201M Wire Crimp Pull Tester, 200 lbF; 230 VAC

Mark-10  |   Mfr# WT3-201ME   |   Item# DO-25301-85

$3,950.00 USD/EACH

Do you qualify for a better price? Log in now!

Are you a reseller or buying in bulk? Call us today.


Usually ships in 8 days.
Qty

  • Motorized for reliable and repeatable test results
  • Measure real-time and peak pull-off force up to 200 lbF (1 kN) for wire and tube terminations while meeting UL, ISO, ASTM, SAE, and MIL requirements
  • Features auto start-up upon loading and auto-reverse at sample break or load
  • Program pass/fail limits and easily see results with the green and red LED indicators
  • Accommodates wire gauge sizes from AWG 30 to AWG 3 and sample lengths of 6.5" (165 mm) minimum
  • Store measurements and statistics for up to 2000 data points
  • Transfer data to PC using the data acquisition software (included) or transfer to a spreadsheet for additional manipulation
  • Outputs include USB, RS-232, Mitutoyo (Digimatic), and analog for easy insertion into your testing procedure
  • Optional add-on features include pulling to a specified load, holding a load, time-and-date stamp for each data point, and the ability to save and recall up to 500 profiles for various test requirements.

  • Wire diameter range: AWG 30 to AWG 3, 0.01" to 0.25" (0.3 to 6.3 mm)
  • Wire sample length range: Minimum 6.5" (165 mm), excluding termination
  • Maximum elongation: 1.7" (43 mm)
The WT3-201M motorized wire crimp pull tester can perform all your wire testing needs without the bulky lab set up or tiresome manual tester. The compact size easily fits on a bench and still has all the features of a full-sized motorized force testing station — you get the best of both worlds!

This pull tester features automatic start upon loading and auto-reverse, output, data storage, and zeroing upon sample break to increase testing efficiency. Output the results using USB, RS-232, Mitutoyo (Digimatic), or analog outputs. The 2000 data point memory includes statistics for each sample — time and date stamp for each point is optional (order separately). Data may be transferred to PC using the MESUR™ Lite data acquisition software (included) for single or multipoint table generation, or used to transfer results to a spreadsheet for further analysis.

The included wire crimp fixture has multiple slots, varying in size, to hold the most common crimp styles and wire gauge sizes AWG 30 to AWG 3 (0.01" to 0.25" or 0.25 to 6.3 mm). Optional fixtures include a ring-style crimp fixture for pin diameters of 1/8" to 3/8" (3.2 to 9.5 mm), or a blank fixture to be machined by the user for special applications or crimp styles. Samples should be at least 6.5" (165 mm) in length.

Add-on features include being able to perform nondestructive tests such as pulling to a specified load or holding a load for a specified amount of time per UL 486A/B, saving and recalling up to 500 profiles for user-defined test procedures, and a time-and-date stamp added to each data point. These features are temporarily enabled in the tester for 160 hours of demo use; you can purchase features at the same time as tester or at a later date.
What's Included:
MESUR™ Lite data acquisition software, USB cable, power cord, and NIST-traceable calibration certificate provided by the manufacturer.
Product Type Force Gauge
Capacity (Newtons) 1000
Capacity (kN) 1
Capacity (oz) 3200
Capacity (kg) 100
Capacity (lbs) 200
Accuracy ±0.2% full-scale
Resolution (oz) 2
Resolution (kg) 0.05
Resolution (lbs) 0.1
Resolution (Newtons) 0.5
Resolution (kN) 0.0005
Output USB / RS-232: configurable up to 115,200 baud
Mitutoyo: serial BCD suitable for all Mitutoyo SPC-compatible devices
Analog: ±1 VDC at capacity, ±0.25% of full scale
General purpose: three open drain outputs, one input
Set points: three open
Sampling rate 7000 Hz
Model WT3-201ME
Qty/ea 1
Brand Mark-10
Speed range Test speed: 0.4 to 12.0 in/min (10 to 300 mm/min)
Approach/reverse speed: 13.0 to 96.0 in/min (325 to 2400 mm/min)
Dimensions (" W) 14-3/4
Dimensions (" H) 5-3/8
Dimensions (" D) 6-3/8
Power 230 VAC, 50 Hz
Manufacturer number WT3-201ME





Technical Resources
 
Service & Support
Still have questions
Contact Our Experts
for FREE product
application selection
and support.
or call 1-800-358-5525
Custom Ordering Solutions
Custom Ordering Solutions
Let us find the exact product you need. We have access to suppliers full lines - for products beyond what you see here. Call 1-800-358-5525
Questions and Answers
Product Reviews