Item Total = $0.00 
Items = 0 
View Cart
United States
1-800-358-5525 or 
log in or register

NIST-Traceable Calibration; 1-Point, Liquid-in-Glass Thermometer

Item# DO-17006-01

$123.00 USD/EACH

Are you a reseller or buying in bulk? Call us today.

Available for order
or call 1-888-358-4712 to order
    Glass thermometers are one of the most common types of temperature instruments and are available in a variety of styles, sizes, and versions. Their unique characteristics of wide range, precision, repeatability, and quick response create a unique challenge for the metrologist who is calibrating these instruments. InnoCal can calibrate spirit-in-glass (SIG) thermometers. Calibrations for glass thermometers use direct comparison in high-stability liquid baths using Precision Reference Thermometers (PRTs) and Standard Platinum Resistance Thermometers (SPRTs) and high precision displays. The glass thermometers are inspected for cracks and liquid-column separations before testing.

    • InnoCal is the only authorized service center for ERTCO brand liquid-in-glass (LIG) thermometers in the United States

    • We also calibrate any make and model of LIG thermometers including Brooklyn Thermometer, Miller and Weber, Inc., LSW, and H-B Instruments

    • Testing range for liquid-in-glass thermometers is from –80 to 420°C (–176 to 788°F)

    • Calibrated at manufacturer’s recommended points or at your desired points depending on your specific requirements. Correction factors are also provided for your convenience.

    To meet your calibration needs:

    • All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu’s), and test uncertainty ratios (TUR’s) at no additional cost!

    • This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer’s published specification

    • EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications

    • Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

    All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A. FDA Compliant.

    InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.Calibrations on glass thermometers are performed using direct comparison in high-stability liquid baths using high-precision PRT’s and SPRT’s and displays. Thermometers are inspected for cracks and liquid-column separations before testing. Measurements are performed at one point between -197 deg C and 550 deg C.

    Points are generally selected at the manufacturer’s specified points but customer-specified points can be accommodated. For certificates with more calibrations points, see 17006-03 for 2 to 4 points, 17006-05 for 5 to 9 points, and 17006-06 for 10 to 15 points.
    Product Type Temperature Calibrations
    Brand InnoCal


    at $65.00 USD/EACH

    Usually ships in 6 days.
    Upgraded Model

    at $185.00 USD/EACH
    Usually ships in 11 days.

    at $245.00 USD/EACH
    Usually ships in 6 days.

    at $277.00 USD/EACH
    Usually ships in 7 days.

    Technical Resources
    Service & Support
    Still have questions
    Contact Our Experts
    for FREE product
    application selection
    and support.
    or call 1-800-358-5525
    Custom Ordering Solutions
    Custom Ordering Solutions
    Let us find the exact product you need. We have access to suppliers full lines - for products beyond what you see here. Call 1-800-358-5525
    Questions and Answers

    Do you have questions about this product?

    Get answers from real customers and in-house experts with AnswerBox.

    1 Question | 1 Answer
    Displaying question 1
    • Q:

      I have a ERTCO thermometer, Cat# 603.3. I need to have a calibration performed on it. Can you do this? Where do I send it?
      Asked on 7/2/2013 by Mike from Bay St Louis, MS

      1 answer



        We can calibrate your thermometer. It would be best to contact us by telephone so we can set up a service return of your product, and verify your address. The contact telephone number is at the top of this page, and you can choose the option for "returns or calibrations".

        Answered on 7/2/2013 by Jack from Technical Support
    Displaying question 1

    Do you have a question about this product? 

    Product Reviews