Item Total = $0.00 
Items = 0 
View Cart
United States
1-800-358-5525 or 
Welcome,
log in or register
 

NIST-Traceable Calibration; Liquid Flowmeter, 1 ccm to 300 LPM water

Item# DO-17080-12

$310.00 USD/EACH

Are you a reseller or buying in bulk? Call us today.


Available for order
or call 1-888-358-4712 to order
Qty

  • Testing range 0.1 to 80,000 sccm at uncertainties as low as
  • (K=2) ±0.2% of reading
  • Testing includes measurement at five to ten points — depending on the meter — equidistant across the range of the flowmeter
  • Certificate includes measured data, graphs, and correlations (if required) to meet the most stringent quality and scientific requirements
Measuring flow is important to process control, with flowmeters used in applications ranging from chemical line monitoring to mining to the oil and gas industry. At InnoCal®, our computerized, automated standards allow us to perform NIST-traceable mass and correlated flow measurements using air or nitrogen gas. When correlation to other gases is needed, our metrologists will provide you with correlated data or a gas correlation table. Other specifics on flowmeter calibrations:
  • Testing range  0-500 LPM air flow
  • Testing includes measurement at 5 to 10 points—depending on the meter—equidistant across the range of the flowmeter
Typical brands that we calibrate include Cole-Parmer®, Alicat, Aalborg Instruments, Gilmont®, Sierra® Instruments, Bios International, and many more.

To meet your calibration needs:

  • All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu’s), and test uncertainty ratios (TUR’s) at no additional cost!
  • This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer’s published specification
  • EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
  • Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A. InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.InnoCal's Metrology Laboratory is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA); certificate number 1746.01. This accreditation is your assurance that one of the foremost outside auditing agencies approves of our internal laboratory policies and procedures.
Product Type Flow Calibration
Qty/ea 1
Brand InnoCal

Accessories
Qty/Price
Availability

at $65.00 USD/EACH

Usually ships in 6 days.




Technical Resources
 
Service & Support
Still have questions
Contact Our Experts
for FREE product
application selection
and support.
or call 1-800-358-5525
Custom Ordering Solutions
Custom Ordering Solutions
Let us find the exact product you need. We have access to suppliers full lines - for products beyond what you see here. Call 1-800-358-5525
Questions and Answers

Do you have questions about this product?

Get answers from real customers and in-house experts with AnswerBox.

1 Question | 1 Answer
Displaying question 1
  • Q:

    Good morning!

    I'm looking for a portable apparatus for industrial water measurement just to read the flow water during the commissioning of our washing tower. We have many tubes varying from 3/4 to 10 inches diameter, Is that ok for this kind of Flow meter?

    The main objective is to check the volume and velocities in each of that tube sizes to set up the valves opening etc..

    The water temperature is around 40 degrees centigrade;
    Water quality will have particles up to 1 mm, after pass in a water self cleaned water.

    The application will be only for commissioning the plant;
    What more accessories is really needed?
    Last is to know the reliability of this instrument;
    Delivery time and considering to export to Brazil.
    Thank you for your quickly reply.
    Best Regards,

    CRANFOS Environment Solutions.

    Eng. J. Andrade
    e-mail: comercial@cranfos.com.br
    Asked on 5/12/2015 by Marcelino from São Paulo - Brazil

    1 answer

    • STAFF EXPERT

      A:

      For a quote for products in Brazil, please contact our dealers directly. dpUNION Instrumentacao Analitica e Cientifica Ltda can be reached at 55-11-5079-8411 or info@dpunion.com.br. SP Labor can be reached at 55 18 2104-9090 or assessoria@splabor.com.br.

      Answered on 5/12/2015 by Danielle from Technical Support
Displaying question 1

Do you have a question about this product? 

Product Reviews

REVIEW SNAPSHOT®

by PowerReviews
InnoCal NIST-Traceable Calibration; Liquid Flowmeter, 1 ccm to 300 LPM water
 
3.0

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

 
3.0

Good work but "oops"

By Bill

from Skan, NY

Verified Buyer

Pros

  • Provided cause of failure

Cons

  • Incomplete assembly

Best Uses

  • In The Field

Comments about InnoCal NIST-Traceable Calibration; Liquid Flowmeter, 1 ccm to 300 LPM water:

Using a digital flow meter saves time and reduces errors. Excellent solution for nearly 3 years. Poor housekeeping plugged the gage up in use. The units were sent back incomplete and had to request more parts. Added delay to mfg line restart.

Displaying review 1

Back to top