Item Total = $0.00 
Items = 0 
View Cart
United States
1-800-358-5525 or 
Welcome,
log in or register

NIST-Traceable Calibration; Pressure Transmitter

DO-17090-29
$155.00 USD/EACH

Are you a reseller or buying in bulk? Call us today.


Usually ships in 9 days.
Qty
    If your experiment or process relies on pressure and vacuum measurements, make sure these instruments remain precise through regular calibrations. InnoCal® performs NIST-traceable pressure calibrations on absolute, gauge, and vacuum measuring instruments from:
    • Gauge, Absolute and Differential Pressure from 0 to 20,000 psig (1.38 mPa)
    • Vacuum from 0 to 29.2 in. Hg (986 mBar)
    • Barometric pressure from 700 to 1100 mBar
    We can calibrate all styles of pressure and vacuum equipment including analog/dial gauges, digital gauges, transducers and transmitters, pressure calibrators, manometers, barometers, deadweight testers, and pressure comparators. InnoCal services all major brands of pressure equipment including Ashcroft®, WIKA®, Crystal Engineering, Fluke®, Druck, GE Sensing, Cole-Parmer®, Extech®, 3D Instruments, and many more!
    To meet your calibration needs:
    • All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu’s), and test uncertainty ratios (TUR’s) at no additional cost!
    • This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer’s published specification
    • EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
    • Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
    All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A. InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.Calibrations on pressure and vacuum transmitters are performed using direct comparison against ultra-precise quartz reference transducers. Pressure measurements can be taken up to 20,000 psi and vacuum measurements down to 29.2 inches of Mercury. The calibration consists of 10 points upscale and 10 points downscale across the range of the instrument.
    Product Type Pressure calibration





    Technical Resources
    Virtual Catalog (PDFs)
  • V79 Davis Sourcebook
  •  
    Service & Support
    Still have questions
    Contact Our Experts
    for FREE product
    application selection
    and support.
    or call 1-800-358-5525
    Custom Ordering Solutions
    Custom Ordering Solutions
    Let us find the exact product you need. We have access to suppliers full lines - for products beyond what you see here. Call 1-800-358-5525
    Questions and Answers

    Do you have questions about this product?

    get answers from real customers and in-house experts with AnswerBox.

    1 Question | 1 Answer
    Displaying question 1
    • Q:

      how often does this have to be calibrated?
      Asked on 4/8/2014 by R&D Dude from Centerville, Ohio

      1 answer

      • STAFF EXPERT

        A:

        Annual recertification is recommended for all calibrations.

        Answered on 4/8/2014 by Polo from Technical Support
    Displaying question 1

    Do you have a question about this product? 

    Product Reviews