NIST-Traceable Calibration; Refractometer

DO-17105-00
$75.00 USD/EACH

Are you a reseller or buying in bulk? Call us today.


Usually ships in 5 days.
Qty

  • All calibration certificates contain as-found and as-left data , estimated measurement uncertainties (emu’s) and test uncertainty ratios (TUR’s) at no additional cost!
  • NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet EPA, USDA, ISO and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
  • Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025 and MIL-STD-45662A. See the sample certificate under the “More Info” section to see how InnoCal’s certificates provide more information in a concise manner than the rest of the industry. InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory which is technically proficient and committed to quality and customer-focused continuous improvement. Our scope of A2LA accreditation can be found under the “More Info” section.

Calibration Focus of the Month

Electrical Calibrations
Temperature Calibrations
Gas Monitor Calibrations
Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated. Measurements reported on our reports are traceable to SI units via national standards maintained by NIST and are performed in compliance with MIL-STD-45662A, ANSI/NCSL Z540-1-1994, 10CFR50, Appendix B, ISO9002-94, and ISO/IEC 17025:2005
Product Type NIST Certificate





Technical Resources
 
Service & Support
Still have questions
Contact Our Experts
for FREE product
application selection
and support.
or call 1-800-358-5525
Custom Ordering Solutions
Custom Ordering Solutions
Let us find the exact product you need. We have access to suppliers full lines - for products beyond what you see here. Call 1-800-358-5525
Questions and Answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

3 Questions | 4 Answers
Displaying questions 1-3
  • Q:

    Is the lab performing the calibration service ISO 17025 certified.
    Asked on 3/4/2011 by Anonymous

    1 answer

    • STAFF EXPERT

      A:

      Measurements reported on our reports are traceable to SI units via national standards maintained by NIST and are performed in compliance with MIL-STD-45662A, ANSI/NCSL Z540-1-1994, 10CFR50, Appendix B, ISO9002-94, and ISO/IEC 17025:2005.

      Answered on 3/4/2011 by Chris from Technical Support
  • Q:

    i have one Master T refractometer, can i send it to you for calibration?
    Asked on 11/15/2010 by Pedro Villa from Tijuana, Baja California

    1 answer

    • Staff Reviewer

      A:

      We will need more information. Please call and speak to our calibration department regarding what model and type of unit you have to see if we can calibrate it. Contact information may be found under the "Contact/About Us" tab.

      Answered on 11/17/2010 by Jen from Technical Support
  • Q:

    How often do the units need to be calibrated.
    Asked on 10/26/2009 by to cold up here for me.

    2 answers

    • STAFF EXPERT

      A:

      Calibration of a unit is generally determined by the company using it and the guidelines they are expected to follow. But, the general rule of thumb is once a year.

      Answered on 10/27/2009 by Jen from Technical Support
    • A:

      Calibration depends on your requirements. ISO 9001:2008 requires it to be calibrated yearly. But AIAG CQI9 standard requires quartly Calabration by an outside sourse and daily to a distiled water standard.
      I Hope this helps

      Answered on 12/9/2009 by MR Heat Treater from York SC
Displaying questions 1-3

Do you have a question about this product? 

Product Reviews

REVIEW SNAPSHOT®

by PowerReviews
NIST-Traceable Calibration; Refractometer
 
5.0

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

 
5.0

I would by this product again

By Nanda

from Philadelphia, PA

About Me Academic/Professional Researcher

Verified Buyer

Pros

  • Accurate
  • Durable
  • Easy To Use
  • Well Calibrated
  • Works Properly

Cons

    Best Uses

    • In The Field

    Comments about NIST-Traceable Calibration; Refractometer:

    Accuracy, durable, works properly

    Displaying review 1

    Back to top