Item Total = $0.00 
Items = 0 
View Cart
United States
1-800-358-5525 or 
Welcome,
log in or register
 

Stir-Pak Analog Speed Controller; 115 VAC

Item# DO-50007-00

$408.00 USD/EACH

Are you a reseller or buying in bulk? Call us today.



    Controllers: Solid-state controller offers precise speed control with a 100:1 adjustment range. A separate ''forward/off/reverse'' switch works independently from the speed control dial — allowing you to repeat mixer speed settings from one run to the next. Electronic control maintains speed regulation better than ±2%. Torque limiting provides greater system protection and reduced motor gear failure. An LED indicates when power is on. Controller housing is IP23 rated.

    Remote controller is connected to the mixer head via a 6-ft (1.8-m), three-wire cord — protects electronics from hazardous spills or splashes. Controller measures 7'' W x 3 3/16'' H x 4 7/8'' D (178 mm W x 81 mm H x 124 mm D).

    What's included: 115 VAC model has a 6-ft (1.8-m) cord with grounded plug. The 230 VAC model has an 8-ft (2.4-m) cord with modular line cord and IEC320/CEE22 connector. When ordering, specify country of destination to receive correct line cord.
    Product Type Mixer controller
    Power (VAC) 115
    Power (Hz) 60
    Qty/ea 1
    Brand Stir-Pak

    Calibrations
    Qty/Price
    Availability

    at $150.00 USD/EACH
    Usually ships in 25 days.




    Technical Resources
     
    Service & Support
    Still have questions
    Contact Our Experts
    for FREE product
    application selection
    and support.
    or call 1-800-358-5525
    Custom Ordering Solutions
    Custom Ordering Solutions
    Let us find the exact product you need. We have access to suppliers full lines - for products beyond what you see here. Call 1-800-358-5525
    Questions and Answers

    Do you have questions about this product?

    Get answers from real customers and in-house experts with AnswerBox.

    8 Questions | 11 Answers
    Displaying questions 1-8
    • Q:

      I have a Stir-Pak 50007-30 mixer. What controller do I need?
      Asked on 1/31/2017 by Chris from Tucosn, Az

      1 answer

      • STAFF EXPERT

        A:

        This is the correct part number for the controller to utilize with your 50007-30 mixer.

        Answered on 1/31/2017 by Rishi from Technical Support
    • Q:

      My previous speed controller is a model 4554-12 and pairs to a 4555-42 mixer. Will the new 50007-00 controller work with my mixer?
      Asked on 3/30/2016 by ED

      4 answers

      • STAFF EXPERT

        A:

        No, the new controllers will not retrofit to the old units.

        Answered on 3/30/2016 by Rishi from Technical Support
      • STAFF EXPERT

        A:

        No, the new controllers will not retrofit to the old units.

        Answered on 3/30/2016 by Rishi from Technical Support
      • STAFF EXPERT

        A:

        No, the new controllers will not retrofit to the old units.

        Answered on 3/30/2016 by Rishi from Technical Support
      • STAFF EXPERT

        A:

        No, the old controllers will not retrofit to the new units.

        Answered on 3/30/2016 by Polo from Technical Support
    • Q:

      How do the speed control numbers relate to rpm?
      Asked on 10/20/2015 by Novel963

      1 answer

      • STAFF EXPERT

        A:

        The potentiometer on the controller does not relate to an exact rpm value as it can be used with different mixers of different speeds. You can figure the approximate rpm value via a ratio where 10:Max rpm and 1:Min rpm.

        Answered on 10/20/2015 by Polo from Technical Support
    • Q:

      Hello!
      I have one question about the stir-Pak speed controller (#50007-00), what is the unit of the speed shown on the controller? The speed range is from 1 to 10.

      Thanks a lot!

      Michelle
      Asked on 1/26/2015 by Michelle from Canada

      1 answer

      • STAFF EXPERT

        A:

        The speed range of the mixer head being used is approximately proportional to the setting on the 0-10 dial. For example, a setting of 5 would be 50% of the maximum RPM of the mixer head.

        Answered on 1/27/2015 by Dan from Technical Support
    • Q:

      Can this controller be used to control a Lightnin bench top mixer?
      Asked on 2/7/2012 by Jack from Lincolnton, N.C.

      1 answer

      • STAFF EXPERT

        A:

        This controller cannot be used to control a Lightin mixer. The Lightnin motors only work from the Lightnin controllers and the Lightnin controllers are designed for use with specific Lightnin mixers.

        Answered on 2/7/2012 by Jay from Customer Service
    • Q:

      Will the EW 50007-00 controller work with the older StirPak mixing head model number 4550-10
      Asked on 12/14/2010 by Anonymous

      1 answer

      • Staff Reviewer

        A:

        No, the new controllers will not retrofit to the old units. And, the controller is now obsolete.

        Answered on 12/15/2010 by Jen from Technical Support
    • Q:

      What parts should I order to oput together a mixer system as shown in this photo? mixer head, controller, shaft, propeller or something else? Do I have to order a base to support the mixer head or it will come together with the head?
      Asked on 11/5/2010 by Anonymous

      1 answer

      • STAFF EXPERT

        A:

        To put together a mixer system as shown in the photo, you will need the following:
        1) Mixer controller (50007-00)
        2) Mixer head (either 50007-10, 50007-20, 50007-30, 50007-40) - depending upon speed needed
        3) Mixing shaft (either 04552-00, 04552-05, 04552-20, 04552-25, 04552-30, 04552-35) -depending upon shaft size
        4) Propeller (either 04552-40, 04552-45, 04552-50, 04552-60) - depending upon size of diameter
        5) Clamps, stands and/or supports
        -04552-65 (tank clamp) - to mount a mixer head and a controller support directly onto an open top drum or container
        -08041-22 (double clamp - for mounting the mixer head onto a stand)
        -04552-80 (support stand)
        -04552-85 (optional screw-in support rod for 04552-80 stand)
        -04552-70 (pivot-mount controller support (secures onto the controller)
        -04552-75 (controller support platform to mount controller adjacent to mixer head)

        Current pricing and availability are on our website. Please contact us if you have any additional questions about this product (Contact information is found under the Contact Us section on our website).

        Answered on 11/9/2010 by Jaime from Technical Support
    • Q:

      What is the catalog no. for a pivot mount to attach the stir-pak to the support stand?
      Asked on 6/12/2009 by Jess from STL

      1 answer

      • STAFF EXPERT

        A:

        The catlog # for the pivot mount to attach the Stir-Pak controller to the support stand is 04552-70.

        Answered on 6/17/2009 by Jaime from Staff Expert
    Displaying questions 1-8

    Do you have a question about this product? 

    Product Reviews